Eten X500 WM6 lighted ROM v3.15

Eten X500 WM6 lighted ROM

Requirements : Eten X500 pocket PC

Overview : Based on official Eten's X500_WWE_R01_032_0436_MOT0110_WM6 (OS 5.2.318 Build 15342.0.0.0)

VERSION 3.15:

Changes:
The same like in WM6.X500.Panot.ver.2.8_ENG but wihout added applications!!!
- Added new bootlogo Eten in blue colour (it looks very nice)
- Working SIM Toolkit
- Working SIM Manager
- Working MMS
- Added Wireless manager link to the Today screen (no application, only some added link to the registry)
- Cleared bottom line (no more program icons)
- Calculator has also skin for landscape mode
- Big RAM 34,20 MB
- Big storage in ROM 72,29 MB
- very fast a stable!
- Realy recommend this ROM!!!!!

Installation Instructions :
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! WARNING !!
! YOU USE THIS ROM AT YOUR OWN RISK !!
!! SHOULD YOU BRICK YOUR DEVICE !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

HOW TO UPDATE:
0) !! CHARGE YOUR BATTERY !!
1) Synchronise with Outlook (or backup all your data somehow)
2) Copy the following files to the root of your freshly formated microSD card (formated into FAT16 filesystem) card:
- USBDLUpdate_Console.exe
- temp.bin
3) Put the card into X500
4) Enter bootloader mode (press and hold Camera button, Record button [the one is close to vol+/vol- buttons] and Power button; press Reset while keeping all above buttons PRESSED;
keep the buttons PRESSED [except Reset] until X500 shows "USB Downloader ***" etc.)
5) If your card is formated correctly, you should see the following info:

USB Downloader 0019
Flash Capacity=128MB

USB Downloader Ready.
SD Card In
Find SDMMC Card.
File= TEMP BIN
Program Image from SDMMC
[etc]

6) The flashing should start. Wait till it passes "EDGE Download status : " and finally
shows "USB host is not connected yet."
Make a HARD-RESET: remove the battery for a couple of seconds, reinsert it, close the
back cover, press and hold Hangup button (red one), press Power button. Keep the Hangup
pressed until "Errase all data" question appears. As soon as it pops up, release the Hangup
button and press and hold Left Softkey.

Download:

With the latest SDHC driver (for SDHC and some SD cards):
English
http://rapidshare.com/files/101029433/WM6.X500.Panot.ver.3.15_ENG.rar

Non SDHC (for SD cards only):
English
http://rapidshare.com/files/101031102/WM6.X500.Panot.ver.3.15_ENG_nonSDHC.rar

Please Post Your Suggestions.