Requirements : iPAQ H5400 Series
Overview : This SoftPaq contains the ROM Update Utility (RUU) and ROM image for the iPAQ Pocket PC h5400 Series.
Installation Instructions :
1. Download the SoftPaq to a directory on your hard drive. The file
downloaded is a self-extracting executable with a filename based
on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions
to unpacking the ROM Update files to a directory (NOTE: this directory
should not contain any file or folder from any previous ROM Upgrade).
3. Establish an Activesync connection between your iPAQ Pocket PC and host
PC through either the USB or Serial connection.
4. Execute the RUU.exe file in the directory created in step 2 above to
begin the upgrade process and follow the instructions displayed by the
ROM Upgrade Utility.
5. You may delete the self-extracting file downloaded in step 1 if you wish.
INSTALLATION NOTES:
1. During the update, the ROM Update Utility will:
- Query your device for current ROM image information.
- Validate that the new ROM image is compatible with your device.
- Allow you to back up your current ROM image.
- Automatically place the iPAQ in flash mode.
- Update or restore a ROM image on your device.
- Require that you press Reset at the end which performs a Full reset
to complete the process.
2. Important: Disable the standby and hibernation modes on your
host PC. If standby or hibernation are activated during the
upgrade process, a critical error may occur.
3. Important: Plan for enough time to start and complete the update process.
The total time to perform a ROM backup and a ROM update is
estimated to be as follows:
*USB - 20 minutes
*Serial - 90 minutes
4. Important: Do not interact with your device or remove it from AC power
or the cradle/cable once the status bar appears on the iPAQ and the actual
update has started.
5. If an error message is displayed during the process, follow any available
instructions to correct the condition and start the utility again.
6. The update process can be performed while connected to a host PC as a Guest
or with an established partnership.
Download:
http://rapidshare.com/files/89240739/iPAQ_H5400_Series_ROM_Update_PPC2002_v1.11_English.rarPlease Post Your Suggestions.
No comments:
Post a Comment