Requirements : iPAQ H3600 series
Overview : This SoftPaq contains the ROM Update Utility (RUU) and ROM image for the iPAQ H3600 Series Pocket PC 2002.
Installation Instructions :
1. Download the SoftPaq to a directory on your hard drive. The file
downloaded is a self-extracting executable with a filename based
on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions
to unpack the ROM Update files to a directory (NOTE: this directory
should not contain any files or folders from any previous ROM Upgrade)
3. Execute the UpgradeUt.exe file from within the directory that was
created from step 2 to begin the upgrade process and follow the
instructions displayed by the ROM Upgrade Utility.
4. You may delete the self-extracting file downloaded in step 1 if you wish.
5. After the installation is complete, you may delete
the directory created in step 2 if you wish.
INSTALLATION NOTES:
1. During the update, the ROM Update Utility will:
- Query your device for current ROM image information.
- Validate that the new ROM image is compatible with your device.
- Allow you to back up your current ROM image.
- Update or restore the ROM image on your device.
2. Important: Disable the standby and hibernation modes on your
host PC. If standby or hibernation are activated during the
upgrade process, a critical error may occur.
3. Plan for enough time to start and complete the update process.
The total time to perform a ROM backup and a ROM update is
estimated to be as follows:
*USB - 10 minutes
*Serial - 30 minutes
4. Important: Do not interact with your device or remove it from power
or the cradle/cable once the actual update has started.
5. The update process can be performed on a device connecting
to a host PC as an established partnership or as a guest.
6. When the ROM Update Utility is used on a host PC for the first time, the
Operating System may not recognize the iPAQ as a USB device after placing
the iPAQ in update mode. Ensure the iPAQ is recognized by waiting
for the host PC to properly find and install the USB driver again before
continueing the update process. (This is not to be confused with the
ActiveSync warning, "Device Not Recognized".)
Download:
http://rapidshare.com/files/89227783/iPAQ_H3600_Series_ROM_Update_PPC2002_v2.20_English.rarPlease Post Your Suggestions.
No comments:
Post a Comment