iPAQ H4100 Series ROM Update WM2003 v1.10 (Official)

iPAQ H4100 Series ROM Update WM2003 v1.10 (Official)

Requirements : iPAQ H4100 Series

Overview : This SoftPaq contains the ROM Update Utility (RUU) and ROM image for the listed handheld model.

Installation Instructions :
1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Execute the downloaded file and follow the on-screen instructions
to unpack the ROM Update files to a directory (NOTE: This
directory should not contain any file or folder from any previous
ROM Upgrade).

3. Establish an Activesync connection between the iPAQ Pocket PC and
host PC through either a USB or Serial connection.

4. Execute the RUU.exe file in the directory created in Step 2 to
begin the upgrade process. Follow the instructions displayed by
the ROM Upgrade Utility.

5. Delete the self-extracting file downloaded in Step 1, if desired.

INSTALLATION NOTES:
1. During the update, the ROM Update Utility will:
- Query the device for current ROM image information.
- Validate that the new ROM image is compatible with the device.
- Automatically place the device in Flash mode.
- Update the ROM image on the device.
- Request that the device be reset when the installation is
complete.

2. IMPORTANT: Disable the Standby and Hibernation modes on the
host PC. If Standby or Hibernation mode are activated during the
upgrade process, a critical error may occur.

3. IMPORTANT: Plan enough time to complete the update process.
The total time required to perform a ROM backup and a ROM update
is estimated to be as follows:
* With USB connection - 20 minutes
* With serial connection - 90 minutes

4. IMPORTANT: Do not interact with the device or remove it from AC
power or the cradle/cable once the status bar appears on the
device and the actual update has started.

5. If an error message is displayed during the process, follow any
available instructions to correct the condition and start the
utility again.

6. The update process can be performed while connected to a host PC
either as a Guest or with an established partnership.

Download:

http://rapidshare.com/files/89236860/iPAQ_H4100_Series_ROM_Update_WM2003_v1.10_English.rar

Please Post Your Suggestions.